MacBook Pro - Installing Additional Memory 

background image

Installing Additional Memory

Your computer has two memory slots that you access by removing the bottom
case. Your MacBook Pro comes with a minimum of 4 gigabytes (GB) of 1333 MHz
Double Data Rate (DDR3) Synchronous Dynamic Random-Access Memory (SDRAM)
installed. Each memory slot can accept an SDRAM module that meets the following
specifications:

Â

Double Data Rate Small Outline Dual Inline Memory Module (DDR3) format

Â

30 mm (1.18 inches)

Â

204-pin

Â

2 GB or 4 GB

Â

PC3-10600S DDR3 1333 MHz Type RAM

You can add two 4 GB memory modules for a maximum of 8 GB of memory.
For best performance, fill both memory slots and install an identical memory
module in each slot.

To install memory in your MacBook Pro:

1

Follow steps 1 and 2 beginning on page 37 to remove the bottom case.

Important: 

When you remove the bottom case, you expose sensitive internal

components, which can be affected by static electricity.

2

Before touching the memory assembly, discharge any static electricity from your body
by touching a metal surface inside the computer.

background image

46

Chapter 3

Boost Your MacBook Pro

3

Push the levers on the sides of the memory module outward to release the module
from the memory card slot.
The memory pops up at an angle. Before removing it, make sure you see the half-circle
notches. If you don’t, try pressing the levers outward again.

Notches

background image

47

Chapter 3

Boost Your MacBook Pro

4

Hold the memory module by its notches and remove it from the slot.

5

Remove the other memory module.

Important: 

Hold the memory modules by their edges, and do not touch the gold

connectors.

6

Insert the new memory module in the slot:

a

Align the notch on the gold edge of the module with the notch in the lower
memory slot.

b

Tilt the card and push the memory into the slot.

c

Use two fingers with firm, even pressure to push down on the memory module.
You should hear a click when the memory is inserted correctly.

d

Repeat to install an additional memory module in the top slot. Press down on the
module to make sure it is level.

background image

48

Chapter 3

Boost Your MacBook Pro

Notches

7

Follow the instructions for replacing the bottom case in step 10 on page 44.

background image

49

Chapter 3

Boost Your MacBook Pro

Making Sure Your MacBook Pro Recognizes the New Memory

After installing additional memory in your MacBook Pro, check whether the computer
recognizes the new memory.

To check the computer’s memory:

1

Start up your MacBook Pro.

2

When you see the Mac OS X desktop, choose Apple () from the menu bar and then
choose About This Mac.
For a detailed breakdown of the memory installed in your computer, open System
Information by clicking More Info, and then click Memory.

If your MacBook Pro doesn’t recognize the memory or doesn’t start up correctly,
confirm that the memory you installed is compatible with your MacBook Pro and that
it’s installed correctly.

background image
background image

Help Center

help

www.apple.com/support